Ibox Dawn How To Set Time

Bedside Alarm Clock with Bluetooth, Wireless Charging & Nightlight

Introduction

The i-box Glow is an all-in-one bedside accessory which combines a represent your phone, perfect for watching videos handsfree, with an integral 5W Wireless charger, Bluetooth speaker, FM radio, dual alarm and even a handy nightlight with multiple colour settings.

Caring for your Glow Warning
Important Safe Information

Important – Please read these instructions fully earlier installing or operating your speaker.

Go along away from flame sources such as lighted candles.

Do not expose to dripping or splashed fluids.

The unit of measurement should non exist exposed to direct sunlight, very high or low temperature, moisture, vibrations, strong magnetic fields, high frequencies and dusty environments.

Practice not place the unit in enclosed bookcases or racks without proper ventilation. Ventilation should not be impeded by covering the ventilation openings with items, such every bit newspapers, tabular array-cloths, defunction, etc.

This product contains a built-in Li-ion battery. It must exist used and charged properly. Improper use can cause the bombardment to grab fire or explode resulting in serious or fatal injury

Never effort to insert wires, pins or other such objects into the vents or openings of the unit.

Do not disassemble or modify the speaker, there are no user serviceable parts.

If the speaker is damaged in anyhow or malfunctions do not use. Consult a qualified service engineer.

Do not use abrasives, benzene, thinner or other solvents to clean the surface of the unit of measurement. To clean, wipe with clean soft textile and a mild detergent solution.

This product uses batteries and both product and batteries should be disposed of accordingly.
Do not dispose of them with household waste at the end of their life cycle; take them to a collection centre for the recycling of electrical, electronic appliances and batteries.
Please check with your Local Say-so for recycling advice.

Box Contents
1x i-box Glow speaker, 1x 5Viii.5A Air conditioning/DC power adaptor

Getting to know your Glow alert clock
Before you become started please read the safety information on pages ii-iii.

Top – Control Panel

i. Way FM/BT/Sounds – short press to change mode, long press to enter standby mode
2. Previous runway
3. Play/Pause
4. Next rails
5. LCD Display
6. Snooze – curt press (when alarm is sounding)
six. Sleep fashion – long press to enter – short press to set sleep time
half-dozen. Dimmer – short press to adjust effulgence
seven. Wireless charging expanse
viii. 1 Alarm 1/Volume –
9. 2 Warning one/Book +
10. Phone stand
eleven. Nightlight On/Change colour – short press, Nightlight Off – long press

Back

Base

10.Telephone stand up
12. Nightlight
thirteen. Speaker
14. USB charging port
15. DC adaptor jack
16. Support battery compartment door

Powering your Glow alarm clock

The Glow is powered past the Air conditioning/DC ability adaptor supplied. Plug the adaptor into a mains socket then connect to the DC power socket (15) on the dorsum of the Glow. The Glow will switch on automatically in clock/standby mode and the LCD will light up.

Battery backup

In addition to the DC In power supply you tin can fit 2 ten AA batteries (not supplied) in the battery compartment (xvi) to provide a backup power supply. If the mains supply is disconnected or interrupted the power supply is automatically switched to the fill-in bombardment, so that the fourth dimension and alarm settings are not lost. Please Notation: speaker, radio and charging functions will non operate when the Glow is powered solely past the redundancy batteries. When plumbing equipment the batteries make sure their polarity matches the markings in the battery compartment.

Setting the time

Plug in the AC/DC power adaptor supplied, the default fourth dimension 0:00 will appear in the LCD brandish (5).
Long press the clock central (three), the LCD volition display "24hr" press the (2) or (4) keys to switch betwixt 24hr and 12hr clock setting.
Then press the clock primal (3) again to set the hour use the (2) or (4) keys to alter the hour.
Press the clock key (iii) to set the minutes use the (two) or (iv) keys to change the minutes.
Press the clock key (3) again to confirm the time set.

To reset the clock, long press the mode fundamental (1) to enter standby mode then follow steps two-5 above.

Bluetooth pairing

Printing the manner central (1) twice to enter Bluetooth pairing manner. "bt" will appear in the display and also the Bluetooth symbol which will wink.
Identify the device you want to pair with your Glow within 1m of it, enter your device's Bluetooth menu and select "i-box Glow" in the device list. When your Glow and device are paired, you will hear a chime and the Bluetooth symbol which will terminate flashing.

In one case paired with a device the Glow will reconnect automatically when switched to Bluetooth way if the paired device is within range.

Bluetooth play operation

While listening to audio in Bluetooth mode:

Printing Volume +/- keys (8/nine) to increase or reduce the volume level.
Printing the Next (iv) or Previous (2) keys to play the next or previous runway.
Printing the Interruption/Play key (3) to play or pause the runway.

FM radio operation

Press the Mode key (i) repeatedly until FM and an FM frequency appear in the LCD brandish.
Long press the (two) or (iv) keys to browse backwards or frontwards through the frequencies to the previous or next radio station.

FM presets – storing and retrieve

To store the station playing to a preset long printing the Play/Pause key (3) a flashing preset number will be displayed, printing the (4) or (two) keys to coil through the 10 preset positions. To store the station playing to the preset position selected and to go out store mode press the Play/Suspension central (three) again.
To call back a preset stored station short printing the Play/Interruption key (3) and press the (4) or (2) keys to curlicue through the presets available to the one you want to play.

White noise and nature soundtrack mode

This mode allows you to play white noise or a selection of nature soundtracks to help lull you to sleep. You can as well use the Slumber role to switch these sounds off subsequently a set period of time. Soundtracks available are: -1: White racket soundtrack, -2: Frog soundtrack, -three: Flowing water soundtrack and -four: Birdsong soundtrack.
1. Press the mode fundamental (1) 3 times to enter this mode. " -1" volition announced in the display and the White Dissonance soundtrack will play.
2. Press (two) or (4) to curlicue through the soundtracks available.
three. Press Book +/- keys (8/ix) to increase or reduce the soundtrack volume level.

Slumber function

1. With audio playing via Bluetooth or the radio playing or with one of the nature soundtracks playing, long printing the Sleep central (vi) to enter Slumber mode.
2. Short printing the primal (6) repeatedly to scroll through Sleep settings bachelor: 120, xc, sixty, xxx, 15, 10, 05, OFF. "SLEEP" will appear in the LCD panel.
three. When sleep is gear up long press the key (vi) to cheque the slumber period remaining.

Setting the alarms

You accept a choice of ii alarms yous tin can set, ideal for couples who demand to go up at different times.
ane. First long press the mode cardinal (1) to enter standby mode, press and agree 1 alert one primal (eight) for 3 seconds, to beginning setting the time for alarm 1.
2. Press (2) or (4) to change the hour then printing 1 alarm 1 key (8) to select.
three. Printing (two) or (4) to change the minutes then press 1 key (8) to select.
4. Press (2) or (4) to ringlet through the alarm sound options – FM (Radio), "bP" (Bleep), -ane (White Noise), -ii (Frog Soundtrack), -3 (Flowing H2o Soundtrack), -4 (Birdsong Soundtrack), press 1 cardinal (viii) to select an option and to exit the alarm setting mode.
To ready alarm 2 repeat steps 1-4 higher up using the 2 alarm 2 central (9).

Alarm enable/disable

In standby mode, press 1 (viii) or two (9) to enable or disable the alarm

Snooze & stop warning

When the alarm sounds, press the Snooze key (6 ) to delay the alarm for 9 minutes. Press whatsoever other key to turn the warning off.

Wireless charging

If you accept a phone with Qi wireless charging adequacy yous can use your Glow to charge it.
Cheers to the positioning of the charging pad information technology is piece of cake to watch movies, await at recipes, brand video calls and much more than while your phone is charging.

1. Place your smart phone centrally on the phone stand (ten). As shown opposite.
2. The wireless charging icon will exist displayed in the bottom left of the LCD console while your phone is charging and the battery charge condition can be seen on your phone's display.

Delight Note: Your telephone will not charge when the Glow is in backup mode (not existence powered via the USB socket).
Wireless charging may interfere with radio reception and nosotros advise you non to try listening to FM radio while charging.

If bug occur when charging or if charging does not start

Remove your smartphone from its case if the thickness of the case exceeds 5mm or if it has a metal composition.
Phones that are capable of wireless charging may need to be placed slightly off eye. The born wireless receiver may non be centred inside the telephone. This varies past brand/model.
The charging time varies depending on the charging capacity of the bombardment and its current residual capacity.
The components may estrus up during the charging process. They will slowly absurd downwards over again after the charging process.

Warning: If the wireless charging icon flashes repeatedly a strange metal object has been detected. Yous should remove it from the charging area immediately equally it can represent a hazard and could cause a fire.

USB Charging

Phones and other devices that don't have Qi charging capability can be charged using the USB charging port (14) located on the back panel of your Glow.

Connect your phone via a suitable USB charging cable (not supplied) to the USB charging port (xiv) on the back of the Glow.
The charge state is indicated on your telephone/external device as usual.

Please Note:

USB Charging may interfere with radio reception and nosotros advise you not to try listening to FM radio while charging.
Please use merely one charging method at a fourth dimension.
Do non attempt to charge your device with wireless charger & USB cablevision both at the same time.

Nightlight

Brusque press the Nighlight key (11) to turn on the LED nightlight panels (12).
Short Printing the Nighlight key (11) repeatedly to scroll through the different colours options available: Cool White, Warm White, Blueish, Green, Cherry, Purple and the 7th choice in which the LED slowly cycles through a spectrum of multiple colours .
Long Press the Nighlight key (11) to switch the Nightlight OFF.

Dimmer office

Short press the Snooze/Sleep/Dimmer key (6) repeatedly to select your preferred lite level for the LCD panel. There are six levels including off.

Specifications

Glow power Input: 5V3.5A
Speaker Output: 1x 3W RMS
Wireless Charging Output: 5W
USB Charging Output: 1A
Dorsum up battery requirement: 2x 1.5V AA Element of group i batteries
Power Adaptor Input: 100-240V~50/60Hz, 0.75A

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your detail situation. All items described in this guide are for analogy purposes only and may not apply to your particular situation. No legal right or entitlements may be obtained from the clarification fabricated in this transmission.

Declaration of conformity

Hereby, Philex Electronic Ltd. declares that the radio equipment: model i-box Glow Alarm Clock with Bluetooth Speaker, Wireless Charging and Nightlight for wireless reception in domestic bounds is in compliance with the Radio Equipment Directive 2022/53/EU. The full text of the European union announcement of conformity is available at the post-obit internet address: world wide web.philex.com/doc

Technical support

For further assistance, advice, information or live conversation visit world wide web.iboxstyle.com

ErP/EuP directive No. (EU) 2022(1782)

Power Supply

Manufacturer/Accost	Philex Electronic Ltd. Kingfisher Wharf, London Route, Bedford, Britain Registration No. 339123
Model identifier	YN-24WA050350EU YN-24WA050350UK

Input voltage	100-240V
Input Air conditioning frequency	50/60Hz
Output voltage	5VDC
Output current	three.5A
Output power	17.5W
Average agile efficiency	85.58%
Efficiency at low load (10 %)	83.01%
No-load ability consumption	0.061W

Waste matter electrical and electronic products should non be disposed of with household waste.
Please recycle where facilities be.
Check with your Local Authority for recycling advice.

Documents / Resources

i-box i-box Glow [pdf] User Manual
i-box, Glow, Bedside, Alarm Clock, Bluetooth, Wireless Charging, Nightlight

References

Source: https://manuals.plus/i-box/i-box-glow-manual